Angle Heads in 5-Axis Machines
With the 5-axis machine, the user has greater machining flexibility because the spindle head can move to different positions. Still, there are a number of reasons for using 90-degree gearboxes with the 5-axis technology.
If an angle head with multiple tool outputs is clamped into the 5-axis machine, different machining operations can be performed in succession without any tool change.
Through the central positioning of the tool in the motor spindle of the 5-axis machine, the load on the bearing is greatly reduced and the machine service life accordingly increased.
A floating aggregate guarantees a constant machining depth by compensating for clamping unevenness and thickness fluctuations in the material.
To avoid the interfering contours of the 5-axis machine, the MONO or DUO FUNCTION LINE can be used for routing CLAMEX grooves on the surface.
Multispindle heads and the planing shaft aggregate with a saw package are great time savers – they generate complex hole patterns and multiple parallel grooves in just one machining step.
The slim design of the EXTRA 2 FUNCTION LINE and the SOTTO FUNCTION LINE brings a machining advantage to the 5-axis machine for underside machining and corner notching in tight spaces.
Defined edge processing
Floating aggregate for defined edge machining of contoured parts on 5-axis machines or robot systems
Derivation of machining chips
During machining, guides the chips via a chip deflector plate directly to the machine extraction system
Economical multiple drilling
Economical drilling of numerous holes or complex hole patterns in just one machining stroke
Milling of Clamex connector grooves
Clamex connectors on surfaces possible thanks to low interfering contour
Corner notching and underside machining
Corner notching in tight spaces and underside machining without board reclamping
Constant and defined machining depth
Constant and defined machining depth despite clamping unevenness and thickness fluctuations
