CHISEL MORTISER AGGREGATE FUNCTION LINE
Drilling of square holes through simultaneous drilling and mortising
Technical Data
| Machining options |  Stemming |
|||
| Max. input speed: | 3.000 rpm | |||
| Max. output speed: | 3.000 rpm | |||
| Gear ratio: | 1 : 1 | |||
| Max. torque: | 20 Nm | |||
| Permissible operating temperature: | max. 85°C | |||
| Positioning of torque arm with respect to tool: | 6 x 60° | |||
| Machining angle: | horizontal and vertical | |||
| Number of tool outputs: | 1 | |||
| Lubrication: | Grease / Lifetime lubrication | |||
Product Information
- Angular recess in stair stringers for connection and positioning of the stair treads in the stringer
- Notching of inner corners
Tool connection
- Chisel holder ER 32
- Drill bit holder ER 20
Machine connection:
ATEMAG aggregates are used on all CNC machines and robot systems. The machine connection is precisely matched to the technical requirements of the CNC machine or robot.
Chisel Mortiser CNC aggregate from ATEMAG for "square hole drilling".
The chisel mortiser CNC aggregate from ATEMAG offers you a technology for precise square holes and sharp corners.
What makes the chisel mortiser CNC aggregate unique?
The hollow chisel aggregate enables precise square holes and sharp corners. The tool set consists of a drill and a fixed chisel, which works outside the drill tool. In the cooperation of the two tools, square holes and sharp-edged corners are made. During the drilling feed, the conically shaped drill is used, while the chisel at the same time precisely forms the corners around the hole. The resulting wood chips are transported inwards to the drill, conveyed upwards through the chip space and ejected.
NEW Technology: Commercially available collets for clamping different tool dimensions
Thanks to the new technology in the ATEMAG hollow chisel aggregate, commercially available collets are now used for tool centering, instead of specially manufactured sleeves as offered in comparable products. This allows the use of globally available collets, which can be obtained directly from any dealer. The use of different tools with different geometries is extremely simple, time-saving and therefore more cost-effective due to the simple exchange of the collets compared to the individually manufactured sleeves.
Advantages of the Chisel Mortiser from ATEMAG?
The new collet solution was developed to facilitate the handling and reclamping of the tool. This technology increases the efficiency of the CNC machine and optimizes its production processes. The Chisel Mortiser CNC aggregate from ATEMAG stands for precision, flexibility and innovation in woodworking.
Product images and videos
Dieser Inhalt eines Drittanbieters wird aufgrund Ihrer fehlenden Zustimmung zu Drittanbieter-Inhalten nicht angezeigt.